Original Keyence
Illustrative image
Photo is an illustration, not a photo of the exact unit you will receive. Need to confirm fitment first? Ask us for photos of the actual unit.
Keyence LR-X100 CMOS Laser Sensor (Genuine, Sourced to Order)
Genuine Keyence LR-X100 CMOS laser sensor sourced to order - green laser (505 nm, Class 1), 25-100 mm detection range, 1 mm standard step, 0.1 mm display resolution, IO-Link v1.1, IP65/IP67, cable type. Supplied by InverterPLC as an independent seller, not an
Reply within 24 hours · Data sheet and lead time available on request · MOQ negotiable
Product overview
Genuine Keyence LR-X100 CMOS laser sensor sourced to order - green laser (505 nm, Class 1), 25-100 mm detection range, 1 mm standard step, 0.1 mm display resolution, IO-Link v1.1, IP65/IP67, cable type. Supplied by InverterPLC as an independent seller, not an authorised Keyence distributor; the 12-month warranty is our own seller warranty, not the manufacturer's.
Technical specifications
| Model | Keyence LR-X100 |
| Type | Cable type (pre-wired) |
| Detection range | 25.0 to 100.0 mm |
| Standard detection step | 1.0 mm |
| Display resolution | 0.1 mm |
| Spot size | Approx. 0.3 mm x approx. 2 mm (at 100 mm detection distance) |
| Response time | 500 us / 1 ms / 3 ms / 10 ms / 200 ms, switchable |
| Light source | |
| Light source | Green laser (505 nm) |
| Laser class | Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10) |
| IO-Link | |
| IO-Link specification | v1.1 / COM2 (38.4 kbps) |
| Functions | |
| Timer function | Timer OFF / off-delay / on-delay / one-shot / on-off delay / on one-shot delay |
| Inputs and outputs | |
| Control output | NPN / PNP open collector, N.O. / N.C. switchable; 30 VDC or less, 50 mA or less, residual voltage 2 V or less |
| External input | External setting input / emission stop / zeroing input / reset hold / area alarm release, switchable; short-circuit current NPN 1 mA or less, PNP 2 mA or less; input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON/OFF only when tuning is selected) |
| I/O combination | Control output x 2, or control output + external input |
| Protection circuits | Reverse power polarity, output overcurrent, output surge, output reverse connection |
| Power supply | |
| Power supply voltage | 16 to 30 VDC (incl. ripple P-P 10% or less), Class 2 |
| Power consumption | Normal 970 mW (38 mA or less at 24 V, 53 mA or less at 16 V); Eco mode ON / ALL 821 mW (32 mA or less at 24 V, 44 mA or less at 16 V, excluding load current) |
| Environmental resistance | |
| Enclosure rating | IP65 / IP67 (IEC60529) |
| Ambient light | Incandescent 16,000 lux or less; sunlight 16,000 lux or less |
| Operating temperature | -10 to +50 degrees C (no freezing) |
| Operating humidity | 35 to 85% RH (no condensation) |
| Vibration resistance | 10 to 500 Hz, power spectral density 0.816 G2/Hz, X/Y/Z |
| Shock resistance | 1,000 m/s2 (100 G), 6 times each in X/Y/Z |
| Material / accessories / weight | |
| Material | Sensing head cover SUS316L; head lens cover PSU; head gasket FKM (lens cover), EVM (cable section); cable PVC; metal conduit SUS304; amplifier cover PBT; indicator window and indicators PAR; amplifier gasket NBR; buttons POM; amplifier M8 connector SUS303 |
| Accessories | Instruction manual, laser warning label |
| Weight | Approx. 90 g |
| Ordering information | |
| Condition | Brand-new genuine Keyence unit, sourced to order; lead time confirmed at quotation (typically 1-3 weeks), inspected before shipment |
| Warranty | 12-month seller warranty provided by InverterPLC |
| Listing note | Supplied as a genuine unit sourced to order by an independent seller. We are not an authorised Keyence distributor; Keyence is a registered trademark of its owner and no OEM warranty is implied. |
| Image note | photos on this page are the manufacturer marketing materials (copyright KEYENCE Corporation), shown for product identification only. |
LR-X100 key points and model variants
Per KEYENCE official specifications:
- Visible eye-safe green laser (505 nm) - Class 1 (IEC60825-1 / FDA CDRH), easy spot alignment on the target, no safety interlock hassle
- CMOS method with 0.1 mm display resolution and 1.0 mm standard detection step at up to 100 mm - stable even on angled or uneven surfaces
- IO-Link v1.1 (COM2) - read measurement values remotely and change settings from the master/PLC
- 500 us response restrictions: only 2-point tuning; detection-range masking is set at tuning (no manual mask range); output 2 limited to error/area alarm output (standard/area not available)
- I/O combinations selectable: control output x 2, or control output + external input
- Variant note: this listing is the cable-type LR-X100. C models (LR-X100C) use an M8 connector; CG models (LR-X100CG) add a metal conduit (SUS304)
FAQ
Q: Is the LR-X100 laser safe for open production lines?
A: Yes - it is a Class 1 laser product (IEC60825-1, FDA CDRH Part1040.10) using a visible 505 nm green laser. Class 1 means no additional protective measures are normally required.
Q: What is the difference between LR-X100, LR-X100C and LR-X100CG?
A: LR-X100 is the cable (pre-wired) type. The C suffix adds an M8 connector (LR-X100C), and CG adds both the M8 connector and a metal conduit (SUS304) - the metal conduit is only available on CG models.
Q: What is the lead time for the LR-X100?
A: This is a genuine unit sourced to order. Lead time is confirmed at quotation, typically 1-3 weeks, and every unit is inspected before shipment.
Typical applications
- High-precision step/height detection (1 mm standard step), sheet and electronics positioning, package seal and presence detection, production lines needing a visible eye-safe green laser
Model listing
| Model supplied | Our part & fitment note |
|---|---|
| Keyence LR-X Series | Original stock part — this listing. Same references as the unit you remove; we check the nameplate revision with you before shipment. |
Supplied as genuine stock as an independent seller — we are not an authorised distributor and no OEM warranty is implied. Send us a photo of your nameplate and we will confirm the exact revision before shipment.
Warranty & shipping
- Warranty: 12 months against manufacturing defects from delivery date.
- Dispatch: current lead time confirmed by email before payment (typically 1–3 weeks)
- Shipping: worldwide by express courier (DHL / FedEx / UPS) or consolidated sea / air freight.
- Power supply: suitable for 50/60 Hz networks; tropicalized build with conformal coating for humidity and salt fog.
- Terms: MOQ negotiable, data sheet and exact lead time confirmed before payment.
Why buyers choose us
- Original stock part — not an aftermarket substitute
- Nameplate and revision checked against your order before shipment
- Inspected and packed for export; photos of the actual unit on request
- 12-month seller warranty and worldwide shipping
Send us an inquiry
Related Sensor products
Keyence LR-ZH500CP CMOS Laser Sensor (Genuine, Sourced to Order) · Keyence
Keyence NU-EP1 EtherNet/IP Communication Unit (Genuine, Sourced to Order) · Keyence
Keyence NU-EC1 EtherCAT Communication Unit (Genuine, Sourced to Order) · Keyence
Keyence NU-DN1 DeviceNet Communication Unit (Genuine, Sourced to Order) · Keyence